StanceMagic 1 Inch (25mm) 5x100 to 5x114.3 Hubcentric Wheel Adapters Spacers with Lip - 56.1mm Bore, 12x1.25 Studs - Compatible with Scion FR-S & Subaru Models (4-Piece Set) - Perfect for Custom Wheel Fitment & Performance Upgrades

StanceMagic Wheel Accessories We have in-depth knowledge of all of the products that we manufacture and carry. Over the years, we have developed a diverse line of products. We manufacture and sell a wide range of wheel spacers & adapters, as well as suspension components. Spacer Specifications Thickness: 1.0" (25mm)Vehicle Side Bolt Pattern: 5x100Wheel Side Bolt Pattern: 5x114.3 (5x4.5")Centerbore: 56.1mmStud/Nut Size: 12x1.25Material: T6 Aerospace Grade AluminumStud Grade: Metric Grade 10.9 4pcs 25mm (1") HUBCENTRIC Wheel Adapters Spacers | 5x100 to 5x114.3 | 56.1mm Bore | 12x1.25 Studs/Nuts Adapt Different Wheels Have you found wheels that you really like but are meant for a different bolt pattern? Maybe, you already purchased wheels and found out you need adapters to run them on your current vehicle. Don't fret, StanceMagic has you covered with our wheel adapters! These 1" adapters will both widen your track and allow you to adapt wheels from another vehicle. See charts for full specs. Note: Professional Installation Recommended. Verify fitment before installation. Re-torque hardware after 25-50 miles. Compatible with the vehicles below... Scion FR-S, Subaru BRZ, Toyota 86 2002-2007 Subaru Baja 1997-2018 Subaru Forester 1993-2003 Subaru Impreza 2004-2021 Subaru Impreza (WILL NOT FIT STI) 1989-2014 Subaru Legacy 2000-2013 Subaru Outback MANUFACTURING & DESIGN Raw Materials Constructed using aerospace grade aluminum, our raw materials are carefully curated and all of which undergoes a stringent inbound quality control process. CNC Machined Our manufacturing facility utilizes the newest, state-of-the-art machinery. Spacers are crafted to exacting specifications and meticulously checked prior to leaving the facility. Perfectly Hubcentric Designed to fit perfectly over your wheel hub, virtually eliminating the possibility of high speed vibrations. Wheel spacers also feature a hubcentric lip to help your wheel center properly. WARNING: READ BEFORE PURCHASE/INSTALLATION IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATHIf your vehicle's wheel studs are longer than 1", the back of your wheels need pockets to accommodate the stud/nutsFender Gap: Measure wheel gap for clearance. You'll need at least 1" of clearance to prevent wheel/tire from touching the fenderTools: A torque wrench is required. Don't use air or impact wrenchesCheck and re-torque all nuts within 25-50 miles of installationFitment: Use the application list above. If your vehicle does not appear on this list, please see the "Questions and Answer" section below.

StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check 1) Vehicle Hub is 56.1mm; 2) Wheel studs are M12x1.25 12x1.25mm threads; 3) You have 1.0" (25mm) of space between your fender and your wheel/tire; 4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit); 5) Wheel center bore needs to be no smaller than 56.1mm.

[SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness 1.0" (25mm) Wide | Vehicle Bolt Pattern 5/100 | Wheel Bolt Pattern 5x114.3 (5x4.5") | Hub Bore 56.1mm | Stud/Nut Thread Size 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs.

[PRODUCT BENEFITS] Allows you to install 5x114.3 (5x4.5") Wheels on your vehicle. Hubcentric design ensures the spacer bore fits perfectly around 56.1mm vehicle hubs and the 56.1mm lip functions as an extension of the hub to prevent wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow you to install wider rims/tires. Gives your vehicle a more aggressive stance.

[INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY Torque lug nuts to manufacturer specifications. Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. See Description for additional install information.