2-Pack 5mm (3/16 Inch) Hubcentric Wheel Spacers 5x4.5 & 5x4.75 Bolt Pattern (70.5mm Bore) - Compatible with Ford, Cadillac, Lincoln, Mazda, Chevy, GMC, Pontiac (5x114.3 & 5x120.7) - Perfect for Enhanced Stance & Tire Clearance on Trucks & SUVs

StanceMagic Wheel Accessories We have in-depth knowledge of all of the products that we manufacture and carry. Over the years, we have developed a diverse line of products. We manufacture and sell a wide range of wheel spacers & adapters, as well as suspension components. Spacer Specifications Thickness: 5mmBolt Pattern: 5x4.5" (5x114.3mm) OR 5x4.75" (5x120.7mm)Centerbore: 70.5mmMaterial: T6 Aerospace Grade AluminumColor: Silver 2pc 5mm (3/16") Thick HUBCENTRIC 5x4.5 & 5x4.75 Wheel Spacers (70.5mm Bore) Widen Your Track Ride with style with StanceMagic wheel spacers, designed to fit multiple vehicles. Sometimes you need to fine tune your wheel fitment to get rid of that wheel gap. Or maybe you downgraded your tires and can't stand the sight of your wheels not fitting perfectly. Fret no more, these are the spacers for you! Note: Professional Installation Recommended. Verify fitment before installation. Re-torque hardware after 25-50 miles. Works ONLY on vehicles with either 5x4.5" (5x114.3mm) OR 5x4.75" (5x120.7mm) bolt patterns. Vehicle MUST HAVE 70.5mm hub diameter. WILL NOT work with vehicles that use 4, 6, or 8-lug bolt patterns. Vehicle Fitment List Compatible with FORD: 1967-1973 Mustang | 1994-2020 Mustang | 2007-2011 Edge | 2003-2004 Mach 1 | 1991-2011 Crown Victoria | 1982-1990 Bronco (Does not fit XLT Model) | 1981-2012 Ranger | 1991-2010 Explorer | 2001-2010 Explorer Sport TracCompatible with CHEVROLET: 1987-2005 Blazer | 1982-2003 Camaro | 1984-2020 Corvette | 1982-1987 El Camino | 1982-2004 S10 | 1982-2004 S10 BlazerCompatible with LINCOLN: 1984-1992 Mark 7 | 1982-2011 Town Car | 2003-2005 Aviator Compatible with BUICK: 1979-1985 Riviera Compatible with CADILLAC: 1979-1985 Eldorado | 2003-2009 XLR Compatible with GMC: 1982-1991 S15 | 1991-2005 Jimmy | 1990-2004 Sonoma Compatible with Pontiac: 1982-2002 Firebird | 1964-1987 GTO | 1980-1985 Phoenix | 1984-1997 Trans Am | 1990-1997 Trans Sport WARNING: READ BEFORE PURCHASE/INSTALLATION IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATH.May require extended wheel studs or lug bolts. These items are not included with this listing. Buyers need to ensure to get 6-9 full turns of the lugs when tightening, or wheel may not properly be secured.Fender Gap: Measure your wheel gap for clearance. You will need at least 5mm of fender clearance to prevent the wheel/tire from hitting the fender liner.Tools: A torque wrench is required. Never use air or impact wrenches.Check and re-torque all lugs within 25-50 miles of installation.Fitment: Use the application list above. If your vehicle does not appear on this list, please see the "Questions and Answer" section below.

StanceMagic Hubcentric Wheel Spacers for vehicles with 5x114.3 (5x4.5") or 5x120.65 (5x4.75") bolt pattern and 70.5mm Centerbore. Compatible with Chevrolet Blazer Camaro Corvette El Camino S10 Blazer. Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer Sport Trac. Compatible with GMC S15 Jimmy Sonoma Envoy. Compatible with Pontiac Firebird Grand Am Grand Prix GTO Phoenix Trans Am Trans Sport. Check Year/Make/Model in Description. May fit others, verify using spacer specifications.

[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check 1) You have 5mm of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE NOT INCLUDED with this listing); 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm.

[SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness 5mm Wide | Bolt Pattern 5x114.3 (5x4.5") & 5x120.65 (5x4.75") | Hub Center Bore 70.5mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.

[PRODUCT BENEFITS] Our unique design reduces the weight of the spacers by 50% compared to other spacers on the market, which reduces unsprung weight and provides optimal performance. Hubcentric Bore fits perfectly around 70.5mm hubs to eliminate wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Reduce / Eliminate pesky wheel & fender gap.

[INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. May need extended bolts/studs (not included). While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Description for additional install information.